$299.99
Molded semi-rigid pond made with high density polyethelene
67” X 48” X 18” deep
Pond holds 91 gallons of water and is ideally suited for corner installation locations next to decks or patios.
Frost resistant
UV inhibited
Dig your hole a little bigger than the pond.
Using dirt or sand, to fill underneath, to level out the pond. Use a level, this will help a lot.
Push dirt or sand down the side walls, about 3 or 4 inches high, level around the pond outside walls, then start adding water.
As the water level reaches the height of stacked dirt, start adding more dirt and continue this until you reach the top.
Ennerdale Pond
$299.99
Molded semi-rigid pond made with high density polyethelene
67” X 48” X 18” deep
Pond holds 91 gallons of water and is ideally suited for corner installation locations next to decks or patios.
Frost resistant
UV inhibited
Description
Installation Instructions:
Dig your hole a little bigger than the pond.
Using dirt or sand, to fill underneath, to level out the pond. Use a level, this will help a lot.
Push dirt or sand down the side walls, about 3 or 4 inches high, level around the pond outside walls, then start adding water.
As the water level reaches the height of stacked dirt, start adding more dirt and continue this until you reach the top.