Using dirt or sand, to fill underneath, to level out the pond. Use a level, this will help a lot.
Push dirt or sand down the side walls, about 3 or 4 inches high, level around the pond outside walls, then start adding water.
As the water level reaches the height of stacked dirt, start adding more dirt and continue this until you reach the top.
Care must be taken when installing (backfilling), as they will deform from weight and pressure of water if not supported. The black colour gives the best illusion of depth and allows the decorative features of the pond to stand out. e.g. fountains, plants & fish.
Windermere Pond
$299.99
Molded semi-rigid pond made with high density polyethelene
74” X 51” X 22” deep, 133 gallons
Pond is robust, light and easy to install.
Informal peanut shape with plenty of shelving for pond plants and good depth for fish.
Frost resistant
UV stabilised and have a proven long life expectancy.
Description
Installation Instructions:
Dig your hole a little bigger than the pond.
Using dirt or sand, to fill underneath, to level out the pond. Use a level, this will help a lot.
Push dirt or sand down the side walls, about 3 or 4 inches high, level around the pond outside walls, then start adding water.
As the water level reaches the height of stacked dirt, start adding more dirt and continue this until you reach the top.
Care must be taken when installing (backfilling), as they will deform from weight and pressure of water if not supported. The black colour gives the best illusion of depth and allows the decorative features of the pond to stand out. e.g. fountains, plants & fish.